Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric’s durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.
- Pin locking slider locks in place when the pins on the puller are pushed into the zipper elements
- Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.
- Laydown collar
- Elastic opening for tighter fit at wrist
- Elastic opening for tighter fit at ankle
- Manufactured under specifications that do not contain natural rubber latex.
- Stormflaps.
Part Numbers
- TY125SWHMD002500 – TY125S-MD – Size Medium
- TY125SWHLG002500 – TY125S-LG – Size Large
- TY125SWHXL002500 – TY125S-XL – Size X-Large
- TY125SWH2X002500 – TY125S-2X – Size 2X-Large
- TY125SWH3X002500 – TY125S-3X – Size 3X-Large
- TY125SWH4X002500 – TY125S-4X – Size 4X-Large
- TY125SWH5X002500 – TY125S-5X – Size 5X-Large
| Property | Test Method | Typical Result |
|---|---|---|
| Thickness | ASTM D1777 | 5.9 mils |
| Basis Weight | ASTM D3776 | 1.2 oz/yd2 |
| Burst Strength – Mullen | ASTM D774 | 50 psi |
| Seam Strength | ASTM D1683 | > 19 lbf |
| Breaking Strength – Grab (MD) | ASTM D5034 | 18 lbf/in |
| Breaking Strength – Grab (CD) | ASTM D5034 | 22 lbf/in |
| Hydrostatic Head | AATCC 127 | 45 inches H2O |
| Surface Resistivity (23°C / 25% RH). | EN 1149-1 | <2.5 x 10^9 ohms |
| Wearing Apparel Flammability | 16 CFR 1610  |
Class 1 |
Related products
Industrial Supplies
Industrial Supplies
Industrial Supplies
Industrial Supplies
Cut Resistant Gloves
Industrial Supplies
Weiler 86126 Burr-Rx? Crimped Filament Wheel Brush, 8 In Dia, 7/8 In W Face, 4000 Rpm
3M Abrasives
